LED UV CURING SYSTEM F-1295UV

LED UV CURING SYSTEM F-1295UV

1024 752 Altegra automation

LED UV CURING SYSTEM F-1295UV is an alternative against the mercury curing systems

Normally for UV curing mercury lamps are used  with energy demand of up to 80-240 W/cm2. Service time of gas lamps is at 2000 hours assuming that power decline is obvious within the first 1000 hours. Normally mercury lamps of (360 nm) are used for thin and bright surfaces while lamps operating in the longer wave range (usually of 420 nm) are used for thicker and pigmented surfaces.

LED UV džiovykla
  • Length of wave: UV-A: 365-420nm
  • Radiated power to surface up to: 10w/cm2
  • Estimated time in operation: >20 000 hours
  • Power consumption operating at max. capacity and continuous 100% load in combination with the cooler: 10 250w
  • Power consumtion oterating at 300-350mJ level and constant 100% load: ~3200-4500w
  • Average consumption power operating at selective mode when the surface is radiated with 300-350mJ: 1200-3400w
  • Option for selective drying when the radiation is elevated only to the surfaces where the moving objects are positioned
UV LED curing system
  • Adjustable height above the conveyor: 20-100mm
  • Working distance to the top of the moving object: 10-25mm